|
|
HOME
> PRODUCTS
Click here
|
NEW V-by-One® HS IP core
V-by-One®HS was developed by Thine Electronics Inc. to support the higher frame rates and the higher resolutions required by advancing FPD technologies, while reducing costs and time to market.
- Scalable from 1 to 32 lanes
- Selectable color depth from 18 to 36bpp
- Auto pixel clock recovery
- Altera Video IP suite compatible.
|
Click here
|
NEW DisplayPort IP core
Direct connection to DisplayPort devices using the Bitec DisplayPort core.
- Support for 1,2 & 4-lane
- Support 1.62 & 2.7GB/s link rate
- 80B/10B Decoder
- 16-bit de-scrambler
- 6,8,10,12 & 16 bit color support
|
Click here
|
NEW h.264 AVC Encoders from Jointwave
Outstanding quality family of h.264 encoders from Jointwave
- Input: Hsync Vsync 16bits parallel data, YUV4:2:2
- Output: NAL standard packets
- GOP configuration: I, IP
- I16x16 and I4x4 all intra prediction modes
- Multiple inter prediction modes
- CABAC or CAVLC entropy encoding
- Output bit rate: 0.5Mbps to 300Mbps
- 1/4 sub-pixel motion estimation
- Mode Decision in 1/4 sub-pixel to get best quality
- Hadmard transform for intra and inter prediction
- Deblocking filter
- External memory: SDRAM/DDR/DDR2
- No external memory required for Intra Profile
|
Click here
|
Cyclone III Video Development Kit
Cost effective kit targeted at Video processing development using a Cyclone III device.
- Altera EP3C120F780 Development board
- Bitec HSMC Quad Video daughter card
- Bitec HSMC DVI daughter card
- Collection of video reference designs
|
Click here
|
NEW Averlogic AL460 Video FIFO Development Kit
Complete kit for application development using the Averlogic AL460 Video FIFO.
|
Click here
|
Cyclone III SDALTEVK Kit
Cost effective bundle for 3G SDI Professional Video development
- Cyclone III EP3C120F780 Development base kit
- SDALTEVK Daughtercard
|
Click here
|
IP Camera Front End
Altera optimised CMOS sensor front end IP core.
- Fully parameterised line buffer·
- Auto line length adaptation for run-time resolution changes·
- Minimal memory footprint·
- Fully parameterised·
- Bayer to RGB conversion·
- Colour bar output·
- Gamma correction/Colour space conversion
|
Click here
|
HSMC Broadcast Video Board
Develop profesional video fpga based systems using the Bitec BVDC.
- Dual ASI/SD-SDI transmitter/receiver
- Adaptive cable equalizers
- Multi-rate cable drivers
- 27 Mhz VCXO
- 200Mhz Quadrature Modulating 14-bit DAC
- Flexible clocking options for DAC
|
Click here
|
HSMC Quad Video Board
Connect multiple live video streams to your Altera FPGA using the Bitec Quad Video board. Allows 4 S-Video or 8 Composite video inputs. An integrated
video output provides DVI, RGB or composite TV connectivity.
- Four Separate Video Decoder Channels accept NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L)
- Support ITU-R BT.601
- High-Speed 9-Bit ADC on each channel
- Two Composite Inputs or One S-video Input (for Each Channel)
- Brightness, Contrast, Saturation, Hue, and Sharpness Control Through i2c
- Four Independent Polymorphic Scalers
- Standard Programmable Video Input Format
- ITU-R BT.656, 8-Bit 4:2:2 With Embedded/Discrete Syncs
- DVI Transmitter up to 165M pixels/second
- TV output supporting graphics resolutions up to 1024 x768 pixels
- Support for all NTSC and PAL formats on video output
- Provides CVBS, S-Video and SCART (RGB) outputs
|
Click here
|
HSMC DUAL-LINK DVI Board
Two channel Dual-Link DVI output board for Altera FPGA development kits with HSMC expansion port.
- Single link operation from 25-165 Megapixels per second (VGA to UXGA)
- Dual link operation up to 330 Megapixels per second (3200×2400)
- EDID reading/writing
- 12-bit (½ pixel) DDR input with flexible input clocking: Single-clock/dual-edge or dual-clock/single-edge
- I2C slave programming interface
- Cable distance support: Over 10 m
- Monitor detection through Hot-Plug
- Compliant with DVI 1.0
|
Click here
|
HSMC DVI Board
Combined DVI input and output board for Altera FPGA development kits with HSMC expansion port.
- Digital Visual Interface Compliant (DVI 1.0)
- Supports resolutions from VGA to UXGA (1600x1200 & 1920x1080)
- 25 - 165 Mhz Pixel rates
- EDID data reading/writing
- Monitor detection through Hot-Plug
|
Click here
|
UPDATED HSMC Prototyping board
Prototyping board for Altera FPGA development kits with HSMC expansion port.
- High quality, 4-layer, FR4 PCB with plated thru holes
- Convenient access points to every pin on the HSMC connector
- Plugs into Altera Stratix III and Cyclone III development kits using the HSMC interface standard
|
Click here
|
SC Camera interface
5.2 Mega pixel camera module for the Altera FPGA development kits with Santa Cruz expansion port.
- 5.2 Megapixel Omnivision CMOS sensor
- Resolution to 2,592x1,944
- Nios II compatible
|
Click here
|
SC DVI input
DVI input interface for Altera FPGA development kits with Santa Cruz expansion port. Feed real-time video into your FPGA designs!
- Digital Visual Interface Compliant (DVI 1.0)
- Supports resolutions from VGA to UXGA
- 25 – 165 Mhz Pixel rates
- EDID data reading
- Monitor detection through Hot-Plug
|
Click here
|
SC DVI output
DVI output interface for Altera FPGA development kits with Santa Cruz expansion port.
- Digital Visual Interface Compliant (DVI 1.0)
- Supports resolutions from VGA to UXGA
- 25 – 165 Mhz Pixel rates
- EDID data reading
- Monitor detection through Hot-Plug
|
Click here
|
SC Prototyping board
Prototyping board for Altera FPGA development kite with Santa Cruz expansion port.
- 4 Layer PCB with convenient 0.1" pitch spacing hole.
- +3.3V, +5V and GND marked access points
- Fan-out of Santa Cruz Connectors
|
Altera, MegaCore and the Altera and Cyclone logos are Reg. U.S. Pat. & Tm. Off. and marks of Altera in and outside the US
Send to webmaster@bitec-dsp.com with questions or comments about
this website
Copyright © 2008 Bitec Ltd
Terms of Use. | Privacy
Last modified 27 Mar 2008
|
